X-Gard Cantilever

WHY

X-Gard Cantilever

strength

The innovative design allows X-Gard cantilever to exceed maximum cantilever of 6 Inches for X-gard 1.0 or X-Gard 2.0.

reliability and variability

The employment of 8 clamps with 2 cross members enables a correctly installed X-Gard system to provide a reliable snow retention solution At roof edges for panels with larger seam widths.

leak-free

X-Gard Cantilever is mechanically attached with round-point setscrews, gripping the seam securely without penetration and without damage to the panel’s protective finishes.

flexibility

These clamp mounted Cantilevers for metal roofs can be easily retrofitted to existing roofs or incorporated into new construction design. It can be installed any time during the year on almost any metal roof profile.

COMPONENTS

OF THE X-Gard CANTILEVER

X-Gard Cantilever

Cantilever is used for roofing panels with larger seam width in order to cover the edge panel with snow retention system. Is compatible with X-Gard 1.0 and X-gard 2.0 as well.

S-5! clamp

THE correct CLAMP IS SELECTED ACCORDING TO THE ROOFING PROFILE AND IS MECHANICALLY ATTACHED TO THE SEAM WITH ROUND -POINT SETSCREWS.

X-Clip II & III

X-CLIPS ARE SNOW CLIPS THAT INHIBIT ICE / SNOW FROM SLIDING UNDER THE SYSTEM. OPTIONAL FOR SMALLER SEAM WIDTHS AND MANDATORY FOR INDUSTRIAL ROOF PROJECTS.

finishing components

LOCK COLLARS TO BE INSTALLED ON THE ENDS OF EACH RUN (AND MAX. 50' INTERVALS) TO SUPPRESS LATERAL MOVEMENT. END CAPS TO BE INSTALLED ON THE ENDS OF EACH RUN.

X-Gard Cantilever

download, download now, download icon

technical 

drawing